Description
PRS 4 Pot Vintage Wiring Harness with Coil Split Option
This pre-wired PRS 4 Pot Vintage Wiring Harness is designed for replacing old electrics or upgrading the electronics of imported models or for use on DIY Kits. We take a massive amount of care and attention when putting our PRS 4 Pot Vintage Wiring Harnesses together. Everything is fully tested before being posted to you.
Read about our Vintage Wiring Harnesses here >. We use our PRS 4 Pot vintage wiring harnesses in our workshop for our clients guitar upgrades and also for our Axeify guitar upgrading services, read more here >
Components
Premium 500k CTS Potentiometers x 4, split shafts with vintage audio taper and coil splitting option
Capacitor x 2, Size 0.022uF / Sprague Orange Drop or PIO Paper in Oil.
20AWG Tinned copper ground.
You are welcome to contact us with your custom requirements.
Controls – You can have the Push & Pull pots on either the Volume or tone pots.
Volume 1 – Bridge.
Volume 2 – Neck.
Tone 1 – Bridge / Push & Pull for Pickup Coil Split.
Tone 2 – Neck / Push & Pull for Pickup Coil Split.
Or… (Please choose when ordering)
Volume 1 – Bridge / Push & Pull for Pickup Coil Split.
Volume 2 – Neck / Push & Pull for Pickup Coil Split.
Tone 1 – Bridge.
Tone 2 – Neck.
Will this fit my guitar?
Our pre-wired Les Paul Wiring harness is wired to fit all genuine PRS models. If installing into an imported model or a DIY guitar kit you will need to ensure the Potentiometer holes will take CTS pots (approx 10mm). This can be done using a round file or carefully with a 10mm drill.
Centre to centre measurements between components
Centre of neck volume pot and neck tone pot – 65mm.
Centre of neck volume pot and bridge volume pot – 50mm.
Centre of neck tone pot and bridge tone pot – 50mm.
Centre of bridge volume pot and bridge tone pot – 65mm.
Measurements can sometimes vary slightly on some PRS models, so we allow plenty of movement in wire lengths between components to allow for a comfortable fit. If your measurements are different from the above, please let us know and we will build your harness to your specifications.
Installation, Documents & Support
Please see our Support Page for wiring diagrams and fitting instructions.
We have made it as simple as possible to install your PRS 4 Pot Coil Split Push & Pull Wiring Harness. We also offer full support should you need it.
Order Times
We make everything to order and the turnaround time for a PRS 4 Pot Coil Split Push & Pull Wiring Harness is 48 hours.
Also Available
You may want to add a Jack socket and a Pre-Wired 3 Way Toggle Switch to complete the Harness.
PRS 4 Pot Vintage Wiring Harness
PRS 4 Pot Vintage Wiring Harness
