Gibson & Epiphone Les Paul Wiring Kit

Description

Gibson & Epiphone Les Paul Wiring Kit

This Gibson & Epiphone Les Paul Wiring Kit is designed for replacing old electrics or upgrading the electronics of imported models or for use on DIY Kits. We take a massive amount of care and attention when putting our Gibson & Epiphone Les Paul Kits together. Everything is fully tested before being posted to you.

This is a Professional Les Paul wiring Kit using the very best in components to enhance the quality of tone and sound output from your guitar.

Components
Premium 500k CTS Potentiometers x 4, short or long split shaft (fitted with additional nut for height adjustment on the long shaft pot).
Capacitor x 2, Size 0.022uF / Sprague Orange Drop.
20AWG Tinned copper ground.
Heat Shrink Tubing
Pots supplied with Nut, Flat Washer & Locking Star Washer
You are welcome to Contact Us with your custom requirements.

Long or Short Potentiometers? (Pots)
If you are unsure of the pot length required on your Les Paul guitar, then please order the Long Pots as they will fit all models and can also be adjusted in length due to the extra nut fitted, where if you order the Short Pots they may not be long enough.
Short Pot threaded bushing height: 9.52mm.
Long Pot threaded bushing height: 19.05mm (supplied with 2 nuts for height adjustment).

Controls
Volume 1 – Bridge.
Volume 2 – Neck.
Tone 1 – Bridge.
Tone 2 – Neck.

Will this fit my guitar?
Our Les Paul Wiring Kit is designed to fit genuine Gibson & Epiphone models. If installing into an imported model / DIY guitar kit you will need to ensure the Potentiometer holes will take CTS pots (approx 10mm). This can be done using a round file or carefully with a 10mm drill.

Installation, Wiring Diagram and Support
Please see our Support Page for wiring diagrams and fitting instructions.
We have made it as simple as possible to install your Gibson & Epiphone Les Paul Wiring Kit with a fitting guide and simple to follow wiring diagram.
We also offer full support should you need it.

Order Times
Turnaround time for a Gibson & Epiphone Les Paul Wiring Kit is 48 hours.

Gibson / Epiphone Les Paul Wiring Kit